Party Walls

“Net zero” can mean a lot of different things depending on what you choose to measure – zero energy usage, zero carbon emitted, zero lifecycle impact, etc.

At Steven Winter Associates, Inc. (SWA), we work with clients who are approaching net zero from different angles: driven by institutional goals, climate concerns, marketing campaigns, and connecting with municipal emissions targets. One thing we see over and over is that super high performance is difficult to achieve, but with a key simplification – there are not many ways to do it. All roads may lead to Rome but the closer you get, the fewer roads there are to take.

(more…)

In Part 1 of this blog post, we highlighted two of the most commonly used insulations in the U.S.– XPS board and closed-cell polyurethane spray foam – and noted that they are produced with blowing agents (HFC-based) that are putting more carbon into the air during construction than they save during building operation for many decades. We left you with a question: if we don’t use these insulations, how can we make up for the loss of the helpful qualities that has made us dependent on them?

Insulation Alternatives

One part of the answer comes from the development of new materials. In Europe over the last decade, Honeywell developed a new blowing agent, a hydro-fluoro olefin (HFO), which claims a global warming potential (GWP) of less than one, which is less than that of carbon dioxide.  First in Europe, and now in the U.S., manufacturers such as Demilec and Carlisle are coming to market with a closed-cell polyurethane spray foam that uses this blowing agent instead of the HFCs that carry a GWP of well over 1,000. These spray foams have a slightly better R-value  than their high-carbon predecessors, and otherwise have the same qualities that make them useful in multiple contexts – air/vapor barrier capability, conformance to irregularities and penetrations, etc.  However, they also have many of the same downsides – high flammability, potential (and not completely understood) off-gassing post-application, and the basic fact that they are petroleum products.

(more…)

The 2010 ADA Standards and the A117.1 Standard for Accessible and Usable Buildings and Facilities require the bottom 10 inches on the push side of a door to be smooth and free from any obstructions for the full width of the door. While there are some exceptions (e.g., sliding doors or tempered glass doors without stiles), this requirement applies at the following locations:

• 2010 ADA Standards:
  • Public and Common Use Areas: All doors along the accessible route
  • Accessible Dwelling Units: The primary entry door and all doors within the unit intended for user passage
• A117.1 Standard:
  • Public and Common Use Areas: All doors along the accessible route
  • Type B Dwelling Units: The primary entry door
  • Type A and Accessible Dwelling Units: The primary entry door and all doors within the unit intended for user passage

The door surface provision is intended to ensure the safety of people with disabilities who require the use of a wheelchair, walker, cane, or other mobility aid. It is common to utilize the toe of the wheelchair or leading edge of another mobility device to push open a door while moving through it. The smooth surface allows the footrest of a wheelchair or other mobility device that comes into contact with the door to slide across the door easily without catching.

(more…)

It is clear to see that the Passive House (PH) standard is here to stay! Across North America, more States, Provinces, and Municipalities are integrating PH into their building standards. One of the more recent adopters is the City of Toronto. In the most recent version of the Toronto Green Standard (TGS), the PH standard is offered as an alternative compliance path to TGS Tier 3, and with this alternative compliance path one obvious question comes to mind: What is the major difference in required component efficiency for a multifamily building in Toronto that is looking to meet either the PH standard or TGS Tier 3?

The PH standard is performance-based and is focused on decreasing whole building energy demand, improving building durability, providing optimal occupant thermal comfort, improving indoor air quality, and reducing carbon emissions. The PH standard reduces building operation costs, decreases carbon emissions, and supports an improved indoor environmental quality for building occupants. The TGS has similar goals and benefits when compared to the PH standard, and there are some obvious synergies in the program design between TGS and PH. The tiered energy category in the TGS takes a similar approach to PH by offering an annual budget for three different categories. For PH you must comply with a total energy budget for annual heating demand, annual cooling demand, and total source energy use intensity. Similarly, but slightly differently, the TGS offers a budget for total site energy use intensity (TEUI), annual heating demand or Thermal Energy Demand Intensity (TEDI), and the additional category of Greenhouse Gas Intensity (GHGI). In both standards, the path to compliance is non-prescriptive and designers can implement a variety of component efficiencies and system options. See table 1 and 2 below:

 

(more…)

We took some common New Year resolutions and put our SWA spin on them. This year, make resolutions to improve the built environment in 2020!

 

1. Go on a (Carbon) Diet – diets are difficult, but as with all things, moderation is key. Reducing operational carbon use with super-efficient buildings is only part of the equation. We also need to understand the full Life Cycle of carbon use including building materials and products. Fortunately tools such as EC3 are making these analyses easier to understand; and products, including lower carbon insulation options and lower carbon concrete, are becoming readily available.
2. Quit Smoking – enforcing no smoking policies is one of the best strategies to improve the health of all building occupants. If you do allow smoking, make sure you develop a good fresh air strategy and compartmentalize your units with a good air barrier. And check out more of our strategies for healthy indoor environments.
3. Save More Money – lighting provides a significant area for savings. Sure, LEDs are great, but efficient design also means considering lighting power density (LPD). High efficiency fixtures placed in high concentrations still use a lot of energy and can result in over-lit spaces, which drive up upfront and operating costs. Lower your bills and the harsh glare with a smart lighting design.
4. Travel More – seek out hotels and restaurants that people of all abilities can navigate with ease. Access Earth is an app that tracks the accessibility of public spaces worldwide to help take the guesswork out of accessible accommodations in new locations.
5. Learn a New Skill or Hobby – looking to expand your horizons? Check out SWA Careers and join our team of change-makers to help develop and implement innovative solutions to improve the built environment.

 

 

(more…)

As members of the HERS Rating community, we are very excited about the recent study conducted by Freddie Mac determining that homes rated under RESNET’s Home Energy Rating System (HERS) between 2013 and 2017 sold for an average of 2.7% more than comparable unrated homes.

Using a national random sample, the property value analysis found that better-rated homes are sold for 3 – 5% more than lesser-rated homes. In this case the “better” rating means a higher energy efficiency rating. It’s unclear from the study if this means a home with an average HERS rating, such as HERS 55 in the Northeast, could be valued at 2.7% more than the unrated home. And perhaps one approaching Zero Energy, such as HERS 10, could be valued at 5% more than the lower-rated home. I could be doing some very creative math here, but doesn’t that imply that the better rated home might just be valued about 7.7% more than the unrated home?

(more…)

Between gift shopping and trying to keep up the holiday spirit with decorations at home, it can be frustrating to try to remain sustainable. It may feel as though you’re forced to choose between enjoying the holidays and feeling guilty about putting up all those lights around your tree.

Here are 10 ways you can have a festive holiday and feel better about it too:

(more…)

When I first started working at Steven Winter Associates, I didn’t know that one day I’d find myself involved in the development of codes and standards that impact how our buildings get built. I certainly don’t consider myself an expert, but I have learned a few things the hard way and thought they’d be worth sharing if you might be new to it.

So, here’s my very high-level summary of the code development process with respect to the 2021 International Energy Conservation Code (IECC), aka the “model” energy code. If you are looking for more detail, the ICC webpage has plenty of resources and a more detailed infographic than the one we’re showing and discussing here.

 

 

(more…)

ICYMI: The code change proposals for the 2021 IECC are open for voting by Governmental Member Voting Representatives (GMVR) from Monday, November 18^th through Friday, December 6^th, and your vote is instrumental in making buildings consume less energy! [Need a quick refresher on the code process? Check out our blog post here!]

Does your vote even matter?

Overall, there are not actually that many voters on a given proposal. In the energy proposals, last cycle, it ranged from about 200-400 voters per proposal, even though there were a total of 1,247 voters on the Group B codes, which includes the IECC.

 

So a small handful of voters can entirely shape the future of the energy codes that dictate how energy efficient our buildings will be! If history repeats itself, while some online voters tend to align with the Committee, many online voters align their votes with those cast by their fellow ICC voters at the Public Comment Hearings. This happened 81% of the time in 2016. Unlike 2016, in this cycle all the electronic votes cast during the Public Comment Hearings will be rolled into the online vote tally (although those voters can still change their vote).

(more…)

The residential energy efficiency industry has been using blower door testing since the mid 1980’s to measure the air tightness of homes. Since then, we’ve evolved from testing single family homes, to testing entire apartment buildings. The Passive House standard requires whole-building testing, as will many local energy codes, along with assembly testing. While the concept of – taking a powerful fan, temporarily mounting it into the door frame of a building, and either pulling air out (depressurize) or pushing air into it (pressurize) – is the same for buildings both large and small, the execution is quite different for the latter.

Commonly called a whole-building blower door test, we use multiple blower doors to create a pressure difference on the exterior surfaces of the entire building. The amount of air moving through the fans is recorded in cubic feet per minute (CFM) along with the pressure difference from inside to out in pascals. Since the amount of air moving through the fans is equal to the amount of air moving through the gaps, cracks, and holes of the building’s enclosure, it is used to determine the buildings air tightness. Taking additional measurements at various pressure differences increases the measurement accuracy and is required in standards that govern infiltration testing. Larger buildings usually test at a higher-pressure difference and express the leakage rate as cubic feet per minute at 75 pascals or CFM75.

(more…)