Party Walls

You most likely don’t even think about it when using the bathroom. Flip the switch, hear the exhaust fan, and everything is working as it is intended…right? Far too often, the answer is NO, and it is no fault of the user. Sure, homeowners should take a minute each year to vacuum the inside of the exhaust fan housing, but otherwise, these fans should just work. So why don’t they? Hint…it all depends on how it was sized and installed.

Background

The purpose of exhaust ventilation is to remove contaminants (including moisture) that can compromise health, comfort, and durability. Exhaust fans are amongst the simplest mechanical systems in your home, but decades of experience working in homes has shown us that even the easiest things can get screwed up. Far too often, exhaust fans rated for 50 or 80 cubic feet per minute (cfm) of air removal are actually operating at less than 20 cfm. In theory, the exhaust fan should be installed in a suitable location and then ducted to the outside via the most direct path possible. However, the installation of an exhaust fan can involve up to three trades: an electrician typically installs and wires the unit; an HVAC contractor supplies the ductwork; and, the builder/sider/roofer may install the end cap termination. What could go wrong?

As energy efficiency standards and construction techniques have improved over time, new and retrofitted buildings have become more and more air-tight. If not properly addressed, this air-tightness can lead to moisture issues. Quickly removing moisture generated from showers is a key component of any moisture management strategy. While manufacturers have made significant advancements in the performance, durability, and controls of exhaust fans, these improvements can all be side-stepped by a poor installation.

So how do you correct this issue? (more…)

“Trends in Healthcare” is a recurring series that focuses on exciting new designs and technologies we’re seeing in healthcare projects and provides best practices on how to ensure that these latest trends are accessible to persons with disabilities. We build on the wealth of knowledge we gain from working with healthcare design teams, construction crews, and practitioners to provide practical solutions for achieving accessible healthcare environments.

And now for our first installment…Patient Check-in Kiosks!

---

Imagine that you are walking into the waiting room of your doctor’s office for your annual checkup. The waiting room is overflowing with people and the receptionists are answering phone calls, entering information into the computer, and taking care of the long line of patients ahead of you. That’s when, out of the corner of your eye, you see several touch screens located on a nearby counter. You’ve grown accustomed to self check-in kiosks at airports and theaters, but not at your doctor’s office. Eager to skip the long line, you make your way toward the digital devices. Hooray! Patient check-in kiosks have arrived!

(more…)

As we continue to uncover the human health impacts associated with buildings – a space in which we spend 87% of our lives – it is important that we find new and innovative methods of construction to improve overall health and quality of life for occupants.

On this episode of Buildings and Beyond, Robb sits down with SWA’s Managing Director of Sustainable Housing Services, Maureen Mahle, to shed light on the primary health issues found in buildings and discuss the various approaches, resources, and certifications designed to improve occupant health and well-being.  (more…)

A team of SWA consultants recently had the opportunity to tour the newly constructed Delos Office Headquarters, located in the Meatpacking District of New York City. The office, which occupies the fourth and fifth floors of a ten-story building adjacent to the High Line, has obtained WELL Platinum certification through the International WELL Building Institute (IWBI), Petal Certification through the Living Building Challenge, and is currently pursuing LEED v4 Platinum certification through the US Green Building Council (USGBC). From the inception of the tour, it was clear that the space had exceeded the expectations of these certifications, and more.

Overview

Stepping off the elevator, occupants walk over a large metal grate designed to remove debris from shoes, preventing dirt and other particles from contaminating the floor. Then, upon entering the office, visitors are immediately greeted with an abundance of natural light and sense of biophilia. The office is enclosed by large glass curtain walls and filled with an array of plant life. Next to the entrance, a large monitor displays office conditions, such as temperature, humidity, carbon dioxide, and other levels affecting tenant comfort.

The main office area is largely free address, which means employees can freely move to where they feel most comfortable. Each desk is adjustable and includes a monitor, a temperature adjustable task light, and many other utilities that foster productivity. There are greenwalls placed throughout the office (22 to be exact), which are used to purify the air. Clean air is also distributed through floor diffusers and dirty air is removed through the ceiling. Additionally, it is noticeably quiet in the office; the mechanical systems are well insulated and there is a low level white noise sound masking system that lessens harsh noises.  (more…)

National Public Health Week is this week and Today’s theme is “Environmental Health”, which includes protecting and maintaining a healthy indoor environment.

While National Radon Action Month was in January, we wanted to share how this specific indoor air pollutant can affect your health and what compelled a group of us here at SWA to get our homes tested (and remediated).

What is radon and why does it matter?

Radon gas is a naturally occurring byproduct of the radioactive decay of uranium found in some rock and soil. You can’t see, smell or taste radon, but it may be found in drinking water and indoor air. This carcinogenic gas is currently the second leading cause of lung cancer after smoking, according to the National Cancer Institute.

Although radon in drinking water is a concern, radon in soil under homes is the biggest source of radon, and presents the greatest risk to occupants. This pressure-driven mechanism occurs when radon escaping the soil encounters a negative pressure in the home relative to the soil. This pressure differential is caused by exhaust fans in kitchens, bathrooms and appliances, as well as rising warm air created by furnaces, ovens and stoves.

Radon levels can vary dramatically within a region, county, or city. However, the EPA recommends that all homes be tested, regardless of geographic location. To see what the average levels are in your area, check the EPA Radon Zones map.

What radon levels are accepted? Ideal?

(more…)

 

Every April during National Fair Housing Month, those of us on SWA’s Accessibility Team like to partake in activities that remind us why accessible design is so important – both in housing and otherwise. This year, I had the exciting opportunity to be part of a guest jury for a design competition with Marymount University in Arlington, Virginia. The fourth annual Strong by Design-athon is a project exhibition that aims to raise awareness about the needs of veterans with disabilities and inspire the design, technology, and healthcare communities to embrace Universal Design.
(more…)