Party Walls

ICYMI: The code change proposals for the 2021 IECC are open for voting by Governmental Member Voting Representatives (GMVR) from Monday, November 18^th through Friday, December 6^th, and your vote is instrumental in making buildings consume less energy! [Need a quick refresher on the code process? Check out our blog post here!]

Does your vote even matter?

Overall, there are not actually that many voters on a given proposal. In the energy proposals, last cycle, it ranged from about 200-400 voters per proposal, even though there were a total of 1,247 voters on the Group B codes, which includes the IECC.

 

So a small handful of voters can entirely shape the future of the energy codes that dictate how energy efficient our buildings will be! If history repeats itself, while some online voters tend to align with the Committee, many online voters align their votes with those cast by their fellow ICC voters at the Public Comment Hearings. This happened 81% of the time in 2016. Unlike 2016, in this cycle all the electronic votes cast during the Public Comment Hearings will be rolled into the online vote tally (although those voters can still change their vote).

(more…)

The residential energy efficiency industry has been using blower door testing since the mid 1980’s to measure the air tightness of homes. Since then, we’ve evolved from testing single family homes, to testing entire apartment buildings. The Passive House standard requires whole-building testing, as will many local energy codes, along with assembly testing. While the concept of – taking a powerful fan, temporarily mounting it into the door frame of a building, and either pulling air out (depressurize) or pushing air into it (pressurize) – is the same for buildings both large and small, the execution is quite different for the latter.

Commonly called a whole-building blower door test, we use multiple blower doors to create a pressure difference on the exterior surfaces of the entire building. The amount of air moving through the fans is recorded in cubic feet per minute (CFM) along with the pressure difference from inside to out in pascals. Since the amount of air moving through the fans is equal to the amount of air moving through the gaps, cracks, and holes of the building’s enclosure, it is used to determine the buildings air tightness. Taking additional measurements at various pressure differences increases the measurement accuracy and is required in standards that govern infiltration testing. Larger buildings usually test at a higher-pressure difference and express the leakage rate as cubic feet per minute at 75 pascals or CFM75.

(more…)

Did you know that New York City is home to approximately one million people with disabilities? As we often discuss strategies for improving the built environment, it is critical that accessibility remains at the forefront of the conversation. So, in a city as big and dynamic as New York, who is tasked with ensuring that the spaces in which we live, work and play are fair for all?

On this episode, the Buildings + Beyond team had the privilege of chatting with Victor Calise, Commissioner of the NYC Mayor’s Office of People with Disabilities (MOPD). Commissioner Calise describes the actions that he and his team have taken to help NYC become one of the most accessible big cities in the US. In addition, the Commissioner reminds us that we need to take a human-centered approach, not just to design, but to life. (more…)

As part of the Climate Mobilization Act, and in accordance with the its greater carbon emissions reduction goals, New York City passed Local Laws 92 and 94 in April 2019, mandating the installation of rooftop solar photovoltaic systems and/or green roofs on buildings across the city. The new requirements will go into effect on November 15, 2019 and will apply to all new buildings and any existing buildings completing a full roof deck or assembly replacement.

The Mayor’s Office estimates that the solar and green roof installations mandated by these bills will result in 300 MW of new solar capacity, 15 million gallons of new stormwater management capacity, 1 million tons of greenhouse gas reductions, and hundreds of green jobs. Based on these projections, this will account for close to 2.5% of the city’s overall emissions reduction goals.*

The laws require that solar and/or a green roof be installed on all available roof space. Areas deemed “not available” and excluded from the requirements include:

• Areas obstructed by rooftop structures, mechanical equipment, towers, parapets, guardrails, solar thermal systems, cisterns, etc.;
• Fire access pathways and zoning setbacks;
• Recreational spaces that are recorded in the Certificate of Occupancy.

(more…)

In a world where everything seems to be packaged in two layers of plastic, where we are encouraged to constantly discard items to make room for new ones, and where social media drives our desire to consume the newest trends, it can seem impossible to reduce our waste. Living a zero-waste lifestyle seems almost too overwhelming. I find myself wondering, “How can I possibly reduce waste when industries target consumers to do the opposite?” and “Even if I do make changes in my own habits, is it enough to make a difference?”

I struggle with the same paralyzing vastness that Jonathan Chapman mentions throughout his book Emotionally Durable Design. Paralyzing vastness describes the tendency to do nothing when a task seems too large to conquer, instead of taking smaller steps. In the past, the seemingly vast nature of zero-waste living discouraged me from doing anything beyond entry-level recycling, but I realized that minimizing my waste is something worth tackling. Therefore, I will be sharing some ideas for working towards a zero(ish)-waste lifestyle — because going from zero to one hundred, or in this case one hundred to zero can be scary — and I’ll include my experience implementing a few of the ideas myself.

WEEK ONE: Apartment Composting

In blogs and articles that speak on behalf of zero-waste living, the importance of sharing with others and asking for help getting started is most frequently emphasized. For example, my apartment complex does not offer any composting services, but the SWA office does (yay sharing!). For week one, I started composting and designated two small resealable containers — one for food waste, and another for paper towels — that are now living on my kitchen counter. I intended on utilizing these two bins throughout the week, and then bringing them to the office for a dump. If you have the ability to start your own compost bin, that’s great too.

While using paper towels throughout the week, I felt less bad about it knowing that they wouldn’t be going into the landfill, but I developed some questions: If I use the paper towel with cleaning supplies, can it be composted?… Is it worth collecting small bits of food waste when I could just eviscerate them in the garbage disposal?… Are garbage disposals bad for the environment and/or do they affect the energy utilized for wastewater treatment?

(more…)

SWA’s Enclosure Group is acutely aware that insulation is the most important single material choice to maximize the enclosure’s thermal resistance over its operational life. Many of us in the building industry believe that, combined with a good continuous air seal, the highest insulation value makes the greenest enclosure, helping to reduce a structure’s carbon footprint and combat climate change. It may come as a surprise, then, that some of the most commonly used insulation materials are so carbon-heavy to manufacture and/or install, that for many decades they wipe away the carbon-energy savings they are supposed to provide.  The following is a detailed discussion of how and why this is, and what the industry is doing to change the equation.

Embodied vs. Operational Carbon

The built environment looms large in the climate picture, because almost 40% of the total carbon put into the planet’s atmosphere each year is attributed to buildings. Over the past 30 years of green building, we have overwhelmingly focused on operational carbon – the carbon that buildings emit as they are being used. Only recently have we begun to focus on embodied carbon – the carbon that goes into constructing buildings, which is typically far greater than the energy saved in the first decades of operation. Changes in energy codes are aimed at operational carbon, and even those organizations and standards that have been at the forefront of promoting sustainable building [LEED, PH] have not been quantifying or limiting embodied carbon, although they bring attention to it.

The Time Value of Carbon

Assuming that a building stands for many decades, or even centuries, its operational carbon will eclipse its embodied carbon over its lifetime, and therefore when the building’s carbon Life Cycle Assessment (LCA) is calculated, operational carbon savings will be more important than embodied carbon saved/spent in the long run. Why does embodied carbon deserve equal weight with operational carbon? Because of the total global carbon emissions from buildings, 28% is pegged to embodied carbon. That’s already a large percentage, but when you consider the near term, the first 30 years of a building’s life, the percentage jumps to about 50%. In effect, every new building is in carbon debt upon completion due to the huge amount of carbon emitted  in order to construct it., And in order for the climate to benefit from the energy savings provided by a well-insulated and sealed enclosure and a high efficiency energy system, the building needs to last and be used for a very long time. The problem is that we may not have 30 years, let alone 60, to pay off that carbon debt.

(more…)

As building professionals, we often ask ourselves, “what are the most critical components to a high-performance building?” Portland, Maine based architect and building science expert, Jesse Thompson, will tell you it’s air-sealing and ventilation.

On this episode of Buildings and Beyond, Jesse explains the importance of incorporating as many Passive House principles as possible when designing multifamily buildings. His focus on air-sealing and ventilation allows him to effectively maximize building performance, reduce energy use, and increase comfort. Leveraging those strategies, Jesse and his team have completed many noteworthy high-performance buildings in some of the most challenging climates.

 

(more…)

Last week, I read a blog post from Connecticut Fund for the Environment President Curt Johnson, and he reaffirmed what I already expected: my next car will likely be an electric vehicle (EV). I currently drive a Toyota Prius hybrid, but when I bought it in 2013, the price to purchase and to operate an EV did not work out, so I chose the Prius, which has very reliably achieved 50 mpg over the last six years.

As an engineer who admittedly knows nothing about cars, I feel like the information out there on EVs is either slightly biased (i.e., published by EV manufacturers) or not transparent enough with the math to convince me. So I set out to create a blog post that was unbiased and transparent. I liked this one from Tom Murphy, an associate professor of physics at the University of California, San Diego, so hopefully I’m making it a bit more user-friendly and applicable to your current/local situation.

I just wanted to know two simple things (and admit to ignoring a long list of other factors that influence the type of car most people will choose to drive):

Number 1: At what gas price is an EV cheaper to drive per mile?

Number 2: While EV tailpipe emissions are zero, is my local electric grid clean enough that it’s a good idea, right NOW? I know my next car will be electric, I just don’t know WHEN the grid will be clean enough that it’s better for the environment for me to switch.

When I began writing this article, I had no idea what the answers would be.

(more…)

Before you can really dig deep into the advanced design concepts of embodied carbon analysis and whole building energy modeling, you must first perform some bare minimum prep work. An easy way to get the pre-schematic plan up on its legs quickly is to add qualitative performance measures to the architect’s program study or create an Owners Project Requirements (OPR) document. For this article, “qualitative performance measures” refer to the metrics that express embodied carbon, but can also include operational energy, water, and even healthy materials.

An integrated design process (IDP) anchors the architectural program to performance metrics such as carbon dioxide equivalents (CO²e), Energy Use Intensity (EUI), and zero Energy Performance Index (zEPI). So, by completing the IDP, you’re getting the basic tools to optimize embodied carbon and operational energy use in your design:

1. Target the early phase of the project
2. Prepare a Carbon Hotspot and Simple Box energy analysis to compare carbon sensitivity of different schemes not limited to wall and roof construction, massing, and solar exposure.
3. Schedule a workshop with the design team and owner to discuss findings and recommendations.
4. Establish performance targets such as total Carbon Dioxide equivalents as a basic program requirement.
5. Choose a compliance pathway and verify design with Life Cycle Analysis and a Whole Building Energy model.

(more…)

 

Last week, as I was writing this blog, I came across a New York Times article: “The Amazon, Siberia, Indonesia: a World of Fire.” By now, I’m sure most of us are aware that the Amazon Rainforest has been burning for weeks, but this deliberate act of environmental destruction will contribute to a feedback loop. These fires release carbon dioxide and kill the trees and species that not only remove greenhouse gasses from the air but are part of vital fragile ecosystems. As more climate-warming gasses fill the air, extreme weather patterns, drought, species loss, and global warming are exacerbated. These effects then accelerate the spread of infectious disease, global poverty, and human health defects. Overall, climate change and environmental degradation negatively affect both humans and the planet, which makes us less resilient and allows for climate change to accelerate even more aggressively. And the cycle continues.

So, for the sake of our (really wonderful) natural planet, and humankind, it is crucial that we try to hinder this feedback loop and make climate action a priority around the world. And, although individually we can try to have a more reciprocal relationship with the planet, our actions and voices carry more weight collectively, which is where Climate Week NYC comes in.

What is Climate Week NYC?

Organized by The Climate Group, Climate Week NYC is an annual week-long gathering for citizens and global leaders to join forces and take action to mitigate environmental harm caused by human activity. There will be a number of public events each day from September 23-29, including tours, film screenings, conferences, and more.

Fun fact: Swedish teenager and activist Greta Thunberg sailed across the Atlantic all the way from England to meet with UN Secretary-General Antonio Guterres, and to attend the United Nations Climate Action Summit, scheduled on the first day of Climate Week NYC!

(more…)