Party Walls

Human beings spend most of their time in or around the built environment. As we live, work, and play, the design of the spaces we occupy can have a profound impact on our wellbeing.

The way that our environments affect our physical and mental health has long been a topic of discussion in the fields of architecture, urban planning, and environmental psychology. Physical barriers to access can result in the exclusion of people with disabilities; lack of indoor air quality or access to natural light can impact cognitive development or lead to future health issues.

From a mental health perspective, studies have shown that most of our reactions to a space are on an emotional, rather than a rational level and emotional reactions can vary among the occupants of a space. [1,2] Some may feel uneasy, while others feel comfortable.

Articulating the characteristics of a space that trigger certain emotions is a challenge but by considering the people for whom a space is intended, designers can create spaces that positively impact quality of life for those who inhabit them.

With this in mind, we at SWA are developing a fresh approach to creating buildings that perform well for the occupants they serve.

(more…)

The electrification of buildings is considered to be a primary strategy for reducing carbon emissions and kicking fossil fuels. Luckily, due to advancements in technology and carefully developed best practices, heat pumps may be a driving force in helping us to achieve our all-electric goals. But when do heat pumps make sense? As we know, there’s no one-size-fits-all application.

On this episode, Robb chats with Jon Harrod about the feasibility of heat pumps in low-moderate income homes. John shares some important factors to consider when evaluating heat pumps, such as construction type, geographic location, project financing, and more.

(more…)

Operable parts designed to be used by building occupants, including but not limited to, thermostats, dispensers, light switches, fire alarm pull stations, etc., must be located so that they are accessible to everyone. Technical standards referenced by federal, state, and local laws and building codes include design criteria developed to ensure that operable parts are accessible. A 30 x 48 inch clear floor space is required to be positioned at the operable part to support one of two types of reaches: a forward (perpendicular) or a side (parallel) reach. Of the two reach types, each can be unobstructed or obstructed. Unobstructed forward and side reaches do not require reaching over an element to access an operable part. Conversely, obstructed forward and side reaches require reach over an element, such as a countertop or shelf, to access an operable part. Of all the reaches to operable parts, the obstructed forward reach is the most challenging to design and construct. As we always say, the devil is in the details, so proper detailing of the obstructed forward reach is critical to nail down in design.

(more…)

As building professionals and policymakers, it is our responsibility to integrate equity into our work. But how do we ensure equity is being addressed in a comprehensive manner? Fortunately, the Urban Sustainability Directors Network (USDN) has developed a framework for local government decision makers to serve as a guide for ensuring equity in the built environment.

On this episode, we had the pleasure of speaking with USDN’s Program Director for Building Energy, Kathryn Wright. Kathryn summarizes some of the concepts and practices highlighted in the framework and explains how her personal experiences drove her to improve equity in buildings.

(more…)

This is part of a series; see the first post here.

This shouldn’t be news to anyone:  In most homes, insulation and air sealing are the most effective ways to improve comfort and reduce heating and cooling costs.

This holds true regardless of heating systems or fuels used. So why is it emphasized even more when talking about heat pumps and electrification? Four reasons.

1.  Heating System Capacity and Cost.

Say your home has a design heating load of 60,000 Btu/h.[1] If heating with fuel, you’ll need a furnace or boiler with a capacity of at least 60,000 Btu/h. These are easy to find. (In fact, you may have a hard time finding heating systems with capacities lower than this.) Air-source heat pumps, on the other hand, have smaller capacities. I don’t think you’ll find an ASHP with heating output of 60,000 Btu/h at cold winter temperatures. So to meet this load, you’ll need multiple ASHPs. And that gets pricey.

Even if you are not talking about multiple heat pumps, a 3-ton[2] heat pump is quite a bit less costly than a 5-ton heat pump. Costs of heat pumps scale more dramatically than costs of boilers and furnaces. So lower heating loads → fewer, smaller heat pumps → lower upfront costs.

(more…)

To meet the goals of the Paris Climate Agreement, we must make decisions that will result in the greatest near-term carbon savings. This means taking into account both embodied carbon—those upfront emissions associated with the extraction, manufacture, transportation, and assembly of building materials—as well as the carbon that’s emitted over the course of the building’s operational phase.

We can build a high-performance building with very low operational emissions, but if its embodied emissions are so high that even if it’s a net-zero energy building (meaning it has net-zero operational energy consumption) it would take decades for the building to reach net-zero carbon (meaning it has net zero whole-building lifetime carbon emissions), we’re not actually helping to solve the critical issue of near-term carbon.

(more…)

We first released this episode in April 2019. Since then, our topic of discussion with Iain has only become more relevant. We recently caught up with Iain and have some updates to share, which are reflected in the resources below and at the end of the episode. Enjoy!

---

When you fire on a stove-top burner, whether it is electric, gas, or convection, many byproducts are released. This increase in moisture, gas, and other particulates is not only detrimental to the health of a building, but dangerous for human health as well.

To advance our knowledge on this topic, we invited building scientist and ventilation expert, Dr. Iain Walker, from Lawrence Berkeley National Laboratory (LBNL). Dr. Walker discusses strategies for controlling byproducts associated with cooking by focusing on kitchen ventilation.

(more…)

Is Sustainability only for the wealthy? While staring at the double-digit price of organic tomatoes at the local farmers’ market I am inclined to think sustainable is synonymous with exclusive. Unfortunately, many things labeled “sustainable” or “eco-friendly” seem not to be within everyone’s budget. A society where the cost of a Tesla is the average annual income of a household easily convinces us that making sustainable choices comes with a cost many can’t afford.

The ”green” housing industry is no different. Walkable and well-connected neighborhoods, where residents can enjoy abundant services are often the pricey neighborhoods. Toxic-free natural materials, daylight, fresh air, and even living green walls fill the homes of the wealthier and healthier tenants, while high-efficient mechanical systems and solar panels provide (almost invisible) energy savings as compared to their sky-high rents.

On the other side, low-income families are often located in neighborhoods at the edges of cities where community services and fresh healthy food are out of reach except by driving, and where parks and options to catch some fresh air are far and rare. Here the apartments are more likely to be exposed to toxic materials, increasing chances to develop asthma or other diseases. Energy bills are often high with little opportunity to get any lower by using newer energy-saving appliances and equipment.

(more…)

Each day, SWA employees collaborate to create more sustainable, efficient, healthy, and accessible buildings. This holistic approach to the built environment necessitates talented teams with a wide range of specializations. (Want to join us? Check out the open positions on our Careers page!)

For our second staff profile, we interviewed Minaiel Shoaib, a Building Systems Analyst on our BODE (Buildings Operation, Decarbonization, and Efficiency) team. Minaiel is based out of our New York City office and has been at SWA for 1.5 years!

(more…)

This is part of a series; see the first post here.

Building new homes that are all electric makes TONS of sense. I’ve written about that before. Electrifying existing single-family homes, however, is not necessarily straightforward. Many state and utility programs in the Northeast[1] offer hefty incentives for air-source heat pumps (ASHPs), but fuel-fired systems are often left in place and used as the primary heating system. Clearly, when that’s the case, carbon emissions are not reduced much. Other programs are pushing completely electrifying homes and removing fossil fuels, but these programs are not gaining all that much traction.

This may seem obvious, but it’s important to consider homeowners’ goals and desires when installing heat pumps in homes. I don’t necessarily see this considered by policy makers and electrification programs, and I think it’s a big disconnect. Programs and policies are focused on the big picture (appropriately) and generally want to reduce/eliminate fossil fuels to help meet carbon reduction goals. What homeowners want can vary like crazy.

(more…)